Features

Product Specs

Maintenance

When cleaning the bio-sponge and the active carbon box in the filter cylinder, you just need to open the bottom plate and pull them out

When you need to clean the quartz tube or replace the lighting tube, just pull out the filter cylinder and switch the rotation switch

Always disconnect pump power cord before performing maintenance.

• Impeller: 1. Separate the motor unit from the filter part.  2. Gently remove impeller housing from the motor unit.  3. Pull out the magnet impeller.  4.  Clean and wipe the magnet impeller to remove dirt, debris and deposits.  5.  Reinstall the magnet impeller into shaft and impeller housing.
• Carbon Cartridge:  It is recommended to replace carbon cartridge every month for a healthier aquarium.  This carbon cartridge unit is sealed and not refillable.  Carbon removes color, bad smell and dissolved organic matter.
• Foam Filter:  The foam filter combines the important functions of mechanical and biological filter.  This foam filter removed debris and suspended particles and will eventually be colonized by nitrifying bacteria.  This filter requires periodic cleaning to remove debris and particles for restoring its mechanical function.
• Quartz sleeve and Lamp replacement:  1. Separate the motor unit from the filter cylinder.  2.Open rotary faster by turning.  Take out the rotary faster and quartz sleeve step by step and clean the quartz sleeve and inner surface of the product by a soft sponge or cloth.  3. In ease of replacement of UV bulb, take out the old UV lamp and replace with a new lamp.  4.Assemble the unit back to its original state after replacing the lamp (make sure tht the seal ring and any "O" ring are properly placed back).